Majalah Ilmiah UNIKOM
Vol.13 No. 1
55
H a l a m a n
PERANCANGAN TESTER DIGITAL MENGGUNAKAN DISPLAY SEVEN SEGMENT
DENGAN DUA ALTERNATIF SUPPLY TEGANGAN
Bobi Kurniawan
Program Studi Teknik Elektro FTIK Universitas Komputer Indonesia
Network tester or so-called LAN tester is commonly used in the world of technol-
ogy and information specifically related to computer networks. Network tester is
very helpful for the beginner as technicians or students in learning how to install
a network cable type of unshielded twisted pair (UTP) correctly. Not uncommon
for a university to buy this device in large numbers but their use can not survive
for one semester, making it imperative for the institution or the institution must
buy back the tool for lectures next semester so it certainly makes waste
in the provision of goods and services in company or university. The shortcom-
ings of existing tester today is the start of the power button is still using the shift
key so that the key is often broken when operated while the device is still new.
Then the other shortcomings lies in LED indicators are used to determine wheth-
er or not the correct network cabling generated by student or technician before
use on larger networks. In addition, the tester is still very dependent on power
supply batrry used that often by the time it takes turns battry power is weak and
can not be used again so that the learning process becomes inhibited.
Keywords : Network Tester, LAN, Cable UTP
PENDAHULUAN
Dalam membentuk suatu jaringan LAN
(local Area Network), kita membutuhkan
beberapa media hardware yang penting
salah satu yang terpenting adalah media
komunikasinya yaitu kabel. Berdasarkan
literature hampir 85% kegagalan yang ter-
jadi pada jaringan komputer disebabkan
karena adanya kesalahan pada konfigurasi
atau pemasangan susunan kabel dan ko-
nektor. Maka dari itu dibutuhkan alat beru-
pa tester jaringan yang mudah untuk diope-
rasikan dan dipahami oleh seluruh teknisi
jaringan maupun para pemula seperti ma-
hasiswa dan siswa SMK. Adapun jenis kabel
yang digunakan dalam jaringan komputer
ada tiga :
Coaxial Cable
digunakan dalam instalasi jaringan saat
ini dikarenakan transfer rate dari kabel
ini hanya sekitar 10Mbps.
Twisted Pair Cable
yak digunakan di perusahaan dan per-
kantoran serta universitas yang memiliki
banyak computer yang terhubung dalam
suatu jaringan hal ini di dorong oleh ke-
mampuan dan harga yang relative lebih
murah dan kecepatan transfer data
yang lebih baik disbanding kabel koak-
sial.
Fiber Optik Cable
iliki inti serat kaca sebagai saluran un-
tuk menyalurkan sinyal antar terminal
untuk saluran BACKBONE karena trans-
bidang
TEKNIK